SPEAKER STAND TYPE 250/25.50

EUR 0,00 EXCL. VAT

EUR 0,00 (INCL. VAT FOR EU RESIDENTS WITHOUT A VAT NUMBER)
INCLUDING SHIPPING WITHIN EU
AVAILABLE EST. Q2 2020.
This product is currently being finalized and tested.

(Specifications subject to change)

Designed for lighter nearfield and midfield free standing loudspeaker setups and built in a more cost-effective fashion than the larger 400/60.100 stands, the Speaker Stands Type 25/50-250 use custom designed and built high pressure, pre-constrained and tunable “push-pull” SYLOMER® decouplers.

With a decoupling system achieving natural frequencies as low as 8Hz, these stands are simply unique on the market. Your loudspeakers perform at their best by completely removing mechanical transmission of vibrations through the stands to the floor and surrounding structure and furniture.  Distortion levels due to structural re-emissions are reduced in the room, clarity and depth of field over the whole spectrum enhanced.

Height can be adjusted in 50mm (2″) increments.

  • Minimum admissible load: 25kg
  • Maximum admissible load: 50kg
  • Natural frequency at minimum load: 10Hz
  • Natural frequency at maximum load: 8Hz
  • Minimum height: 805mm (31.7") +/-15mm spikes adjustment
  • Maximum height 1200mm (47.2") +/-15mm spikes adjustment
  • Plate dimensions: 365/400mm
  • High quality powder coated steel structure
  • Neoprene Constraint Layer Damping (CLD) of main steel column to avoid structural ringing
  • Top plate damping and anti-slip surface using a 4mm glued neoprene layer

Choose your combination of main frame and veneer siding colors:

Clear

Configure in Set

© 2020 All rights reserved / Imprint / Contact / Privacy policy / Terms and conditions

Northward Systems